Havis Shields Automobile Accessories C TCB 31 User Manual

INSTALL INSTRUCTIONS C-TCB-31

2004-2007 FORD F-150 (EXCLUDING HERITAGE)

TOOLS REQUIRED:

Standard Socket Set

Ratcheting Wrench

Open-end Wrench Set

HARDWARE:

QTY DESCRIPTION

PART #

5/16-18 x 1” Hex head bolt

5/16” Flat washers

5/16-18 Nylock Nut

GSM33012

GSM31006

GSM30017

SUB ASSEMBLY:

1. Identify hardware and components.

2. Remove inner and outer seat base bolts on passenger side front seat.

INSTALLATION:

1. POSITION C-TCB-31:

• Lean seat back and slide C-TCB-31 Base between floor of vehicle and seat base on

inner bolt.

• Screw in factory seat base inner bolt and hand tighten at this time.

• Slide cross brace under passenger seat base outer bolt.

• Screw in factory seat base outer bolt and hand tighten at this time.

• Bolt cross brace to tab on square tube of Base using 5/16-18 x 1” Hex head bolt,

washers and Nylock nut.

•

Tighten all bolts at this time.

Note: It is recommended to mount C-TCB-31 base as far under seat base as possible.

Inner Pole

Base

Cross Brace

C-TCB-31-INST-1-07